Training: RBE No.87/2022 – Module of Non-Gazetted Staff of Electrical Department

Sr. No.	Description	No. of Weeks	Page No.
	(A) INITIAL COURSE FOR App. JE/SSE All CADRE TRD/ TRS/ GS-POWER-TL, DRAWING GROUP
1	JOINING FORMALITIES (AT OWN HQ/DIVISION)	01 W	05
2	PHASE I – FOUNDATION COURSE (FC) & YOGA – MEDITATION – COMMON FOR ALL BRANCH	13 W	06-12
3	FIELD TRAINING FOR	03W Separate for each group	13 -16
3(a)	TRD INCLUDING DRAWING GROUP		14
3(b)	TRS (LOCO/ EMU/ MEMU) INCLUDING DRAWING GROUP		15
3(c)	GS-POWER -TL INCLUDING DRAWING GROUP		16
4	PHASE-II	08 W Separate for each group	17-27
(a)	SPECIALIZED TRAINING COURSE IN TRACTION DISTRIBUTION INCLUDING DRAWING GROUP		18-20
(b)	SPECIALIZED TRAINING COURSE IN TRACTION ROLLING STOCK (LOCO/ EMU/ MEMU) INCLUDING DRAWING GROUP		21-24
(c)	SPECIALIZED TRAINING COURSE IN GS-POWER -TL INCLUDING DRAWING GROUP		25-27
5	GENERAL & SUBSIDIARIES RULES, SAFETY, FIRST AID, FIRE FIGHTING & DISASTER MANAGEMENT (GEN) – COMMON TO ALL BRANCH	4 W	29-30
6	COMPUTER TRAINING (CT) –COMMON TO ALL BRANCH	2 W	30
7	FAMILIARIZATION WITH OTHER DEPARTMENTS (OD) (C&W, PWAY, S&T) – COMMON TO ALL BRANCH	2 W	30
8	ATTACHMENT ON THE JOB EXPERIENCE – COMMON TO ALL BRANCH	14 W	31
9	MISCELLANEOUS TRAINING (MT) – COMMON TO ALL BRANCH	3 W	32
10	PRESENTATION OF PROJECT WORK (PW) – COMMON FOR ALL BRANCH	1 W	32
11	YOGA & MEDITATION – COMMON FOR TO BRANCH INCLUDED IN CTI TRAINING	–	32
12	POSTING EXAMINATION – COMMON TO ALL BRANCH	1 W	32
	(B) Promotee JE (Promoted Through Seniority cum suitability basis)		33-35
	(C) REFRESHER COURSE FOR JE/SSE & DRAWING CADRE After every 3 years for TRD/ TRS/ GS/ TL AC & After every 5 years for Drawing Cadre		33-35

1. JOINING FORMALITIES for App. JE/SSE Common For All Streams including Drawing GROUP

		Duration
	1. JOINING FORMALITIES	1 Week
Place	Division/ Joining unit

2. Initial Training Course

PHASE –I

for App. JE/SSE

(RRB/ IMA/ LDCE/ GDCE/Compassionate Ground)

Common to All Streams including Drawing Group

Note: RRB – Railway Requirement Board;

IMA – Intermediate Apprentice;

LDCE – Limited Departmental Competitive Examination; GDCE – General Departmental Competitive Examination

2. PHASE- I FOUNDATION COURSE (FC)

Duration: 13 Weeks

Place: IRIEEN

Module No.	Brief Description	Duration
FC 01	INTRODUCTION TO WORKING OF RAILWAY ORGANIZATION AND ELECTRICAL DEPARTMENT SET UP, FUNCTIONS OF VARIOUS STREAMS
	Registration formalities
(i)	General introduction to Indian Railways – Brief History, salient features.
(ii)	Organizational structure – Railway administration/ Railway Board setup, Zonal/HQ setup, Divisional setup etc.
(iii)	Introduction to Electrical Department- organizational structure, functions, role of electrical department in Railways.
(iv)	Various units of Railways, Major Workshops, Production units, RDSO etc.
(v)	Duties of JE/ SSEs
FC 02	CONDITION MONITORING	6 Days
(i)	Basic concepts of Condition Monitoring of Electrical Equipment
(ii)	Condition Monitoring Techniques
	DC tests – Insulation Resistance, Hi POT etc.
	AC tests – Capacitance & Tan delta measurement, Partial discharge, surge comparison test, 3rd Harmonics measurement, Transformer Electrical Tests, DCRM of CB etc.
(iii)	Condition Monitoring of Transformers – Theory and Practice of Dissolved Gas Analysis (DGA), BDV, Capacitance & Tan delta measurement of winding and Bushings etc.
(iv)	Condition Monitoring of Power Cables
(v)	Non-destructive testing techniques for crack detection like visual testing, Dye Penetrate Testing, Magnetic Particle Testing, Eddy current testing and Ultrasonic testing etc.
FC 03	BASIC ELECTRICAL & ELECTRONICS	5 Days
(i)	Various terms, units, theory of passive components – L,C,R, basic principles of electricity and Electromagnetic induction and its laws i.e. Ohm’s law, Kirchoff’s law, etc.
(ii)	Classification of electronic components, Active Components – semiconductor physics, construction and operating principle & basic circuit configurations
(iii)	Brief on Power Electronic Devices as Diodes, Zener Diodes, LEDs, BJTs, UJT,FET, MOSFET, SCR, GTO and IGBT etc.
(iv)	Practical on – Oscilloscopes, testing of passive electronic components, Testing of active components etc.
FC 04	POWER ELECTRONICS	06 Days
(i)	Introduction to Converter and Inverter
(ii)	Electric Drives-VVF, VVVF drives etc., Parameter setting, Operation etc.
(iii)	Overview of power electronics in 3 phase Loco
(iv)	Locomotive Static Inverter (SI Unit)
(v)	AC Coach Inverter Unit
FC 05	Welding Technology	02 Days
(i)	Basics of welding, Classification of various types of welding techniques, gas cutting, laser cutting etc. and their application.
(ii)	Safety during welding and gas cutting.
(iii)	Welding defects and prevention.
(iv)	Classification, properties and selection of electrodes.
FC 06	ENGINEERING MATERIALS AND METALLURGY	04 Days
(i)	Ferrous and Non- ferrous Metals used in Railways,
(ii)	Brief on Heat treatment processes, Induction heating,
(iii)	Brief on Metal wear and Lubrication,
(iv)	Plain and roller bearings — Theory, application, selection, storage, maintenance and Do’s and Don’ts
(v)	Lubricants Specifications, Properties and Selection used in Rlys.
(vi)	Rubber components specifications and storage,
(vii)	Electrolytic copper
FC 07	MANAGERIAL SKILLS	04 Days
(i)	Aspects of leadership, leadership theory and evolution,
(ii)	Leadership v/s Management,
(iii)	Role of JE in providing effective leadership.
(iv)	Communication Technology – writing & drafting, reading, speaking and listening.
(v)	Behaviour Management.
(vi)	Team work, Importance of team work in organisation
(vii)	Time management, stress management, interactive exercises in team work, games and activities.
(viii)	Customer Satisfaction. Thinking from customer point of view – what are their needs/expectations and how can we best serve our customers.
(ix)	Positive Attitude, Soft skill
(x)	Values in Administration – Ethics
(xi)	Yoga & Mental Health
FC 08	MATERIAL MANAGEMENT IN RAILWAYS	04 Days
(i)	Introduction to material management.
(ii)	Organization structure of material management organisation of Indian Railways, etc.
(iii)	Functions of material management — Planning and inventory Management (Stock items, PL no. & non stock items), Procurement, Receipt and Inspection & handling of rejection, etc.
(iv)	Modal SOP, IRS-condition of contract ,
(v)	Store Depot working, Stock verification & audit, etc.
(vi)	Scrap disposal
(vii)	Non Stock procurement under works programme, RSP , M&P, etc.
(ix)	E- Procurement, IREPS, GEM procurement, etc.
FC 09	ESTABLISHMENT & INDUSTRIAL MANAGEMENT (DAR, LEAVE AND PASS RULES)	6 Days
	Rules relating to leave, passes, travel on duty
	Promotion of artisans, Quarters, Staff Welfare etc.
	Industrial relations and role of trade unions.
	Discipline and Appeal Rules.
	Conduct Rules.
	Basics of RTI and Disabilities Acts and our obligations and Responsibilities.
	Labour Laws and hours of employment rules (HOER)
	Rajbhasha
	Establishment powers of JE & SSE in open line.
FC 10	Contract Management & Financial management	4 Days
	(i)  Contract Management
	(a)   Tenders & Contracts
	(b)   Vigilance
	(ii)  FINANCIAL MANAGEMENT
	(a) Railway Accounting and Financing Procedures
	(b) Primary units, various demands
	(c) Works programme, M&P and RS programme
	(d) Stages of budgeting (Revised and Budget Estimates, August Review, Final Modification)
	(e) Role of JE & SSE in Tenders & Contracts.
FC 11	FAMILIARISATION WITH ALL STREAMS OF ELECTRICAL ENGINEERING IN RAILWAYS	07 Days
(i)	Familiarization with TRS, TRD, General Services (TL & AC and Power supply).
(ii)	Brief introduction of asset of
	(a) Electric loco – conventional & three phase.
	(b) EMU/MEMU – conventional & three phase.
	(c) TRD – OHE/ PSI/ RC
	(d) General services power supply installation.
	(e) Coaching – train lighting & air conditioning.
(iii)	Electrical Inspector General (EIG) sanction
(iv)	Overview of Codes, manuals and other publications of electrical department issued by Railway board, RDSO etc.- These topics are to be covered in library by studying available Hard/ soft copies.
(v)	Renewable Energy Sources – Solar energy, wind energy etc.
(vi)	Visits to various nearby installations of TRD, TL/AC, LOCO, GS, EMU
(vii)	Accident Management & Disaster management
FC 12	IE RULES AND ENERGY CONSERVATION	04 Days
(i)	Brief on I.E. Rules, Energy Conservation Act, BEE ,ECBC Code, Information on star rated products, etc.
(ii)	Global Warming & climate change , clean development mechanism and carbon credits, etc.
(iii)	Solar Energy Application
(iv)	Energy efficiency measures in Electrical department.
FC 13	ATTACHMENT TO FOLLOWING SHALL BE MADE FOR MAKING FAMILIARIZATION WITH OTHER DEPARTMENTS TO UNDERSTAND THEIR WORKING AND INTER DEPARTMENT COORDINATION.	06 Days
(i)	Working of control office/ TPC/ TLC.	Control office
(ii)	P-Way maintenance/ assets	P.Way Depot/ site
(iii)	Sick lines, C&W depot/ activities	Sick lines, C&W Depots
(iv)	Signalling/ RRI working	Signalling/ R RI Depot
PFGD	Presentation feedback & group discussions	04 Days
	Examination/ Viva voice
	(Topic for presentation will be assigned by IRIEEN)
PHASE I	TOTAL DURATION	13 WEEKS

Note: 6 periods per Day

3. Field Training Module Separate to each Group

Module No.	Brief Description	Duration
3(a)	FIELD TRAINING FOR TRD INCLUDING DRAWING GROUP (Trips will be conducted Stream wise by IRIEEN)
Duration		03 Weeks
Place	Various field units like Major Yards having different types of OHE/ OHE depots/ Power supply installations/ PSUs (BHEL/ BEML/ L&T/ ALLIND etc.), Construction sites of Railways.
FT	Between the two phases of institutional training.
1	Trainee JE/ SSE should be sent for field training/ field visits, wherein they should be given exposure to practical work at various field units.
2	The field unit may be Major Yards having different types of OHE/ Power supply installations/ PSUs (BHEL/ BEML/ L&T etc.)/ Construction sites of Railways.
3	The object of this training is to familiarise the trainee with the actual assets & their equipment, their manufacturing/ assembling processes so that they can visualise the things during their specialised training.
3(b)	FIELD TRAINING (TRS) INCLUDUNG DRAWING GROUP (Trips will be conducted Stream wise by IRIEEN)
Duration		03 Weeks
Place	Various field unit may be CLW, Electric Locomotive Workshop having different types of Electric Locos/ Electric Loco Sheds/ Trip Sheds/ PSUs (like BHEL, CGL, Hind Rectifier, BTIPL, ABB, Simplex Casting Ltd. Raipur, VED Sassomeccanica India Pvt .Ltd. Kanpur, etc.)
FT	Between the two phases of institutional training.	3 Weeks
1	Trainee JE/ SSE should be sent for field training/ field visits, wherein they should be given exposure to practical work processes at various field units.
2	The field unit may be CLW, Electric Locomotive Workshop having different types of Electric Locos/ Electric Loco Sheds/ Trip Sheds/ PSUs (like BHEL, CGL, Hind Rectifier, BTIPL, ABB, Simplex Casting Ltd. Raipur, VED Sassomeccanica India Pvt. Ltd. Kanpur, etc.).
3	The object of this training is to familiarise the trainee with the actual assets & their equipment maintenance, their manufacturing/ assembling processes so that they can visualise the things during their specialised training
3(c)	FIELD TRAINING (GS-TL-OSM) including Drawing Group (Trips will be conducted Stream wise by IRIEEN)
Duration		03 Weeks
Place	Various field units like RCF/ ICF/ MCF/ major workshops/ Major coaching depots/ Power supply installations/ PSUs (BHEL/ BEML etc.), Construction sites of Railways.
FT	Between the two phases of institutional training.	3 Weeks
1	Trainee JE/ SSE should be sent for field training/ field visits, wherein they should be given exposure to practical work processes at various field units.
2	The field unit may be RCF/ICF/MCF/major workshops/ Major coaching depots / Power supply installations/ PSUs (BHEL/ BEML etc.)/ Construction sites of railways.
3	The object of this training is to familiarise the trainee with the actual assets & their equipment, their manufacturing/ assembling processes so that they can visualise the things during their specialised training.

4. Initial Training Course

PHASE –II

for App.JE/SSE (RRB/ IMA/ LDCE/GDCE/ Compassionate Ground)

Separate to All Streams

Note: RRB – Railway Requirement Board;

IMA – Intermediate Apprenticeship;

LDCE – Limited Departmental Competitive Examination;

GDCE – General Departmental Competitive Examination.

4(a)	PHASE II – TRD
	Specialised Training Course in Traction Distribution including Drawing Group
Duration		08 Weeks
Place	IRIEEN
Module No.	Brief Description	Duration
STC-TRD-01	General Description of Fixed Installations	2 days
(i)	Power supply arrangements at sub-station
(ii)	Power supply for signalling
(iii)	Remote control and communication arrangements
(iv)	Overhead Equipment
(v)	Special Warning Signals
STC-TRD-02	Overhead Equipment – I	6 days
(i)	Duties of SSE and JE (OHE)
(ii)	Foundations for OHE Structures
(iii)	OHE Structures
(iv)	Cantilever Assembly
(v)	Regulating Equipment
(vi)	Section Insulator
(vii)	Isolators
(viii)	Droppers
(ix)	Neutral Section
(x)	Conductors
(xi)	Tension length
(xii)	Overlap
(xiii)	Jumpers
(xiv)	Contact wire height
(xv)	Stagger
(xvi)	Encumbrance
(xvii)	Span Length
(xviii)	Implantation/ Setting Distance
(xix)	Turnout and Crossover
(xx)	Clearances
(xxi)	Bonding and Earthing
(xxii)	Principles of sectioning & Numbering Scheme
STC-TRD-03	Over Head Equipment – II	5 days
(i)	Maintenance schedule for overhead equipment.
(ii)	Tower wagon operation, maintenance and safety while working.
(iii)	Safety rules for OHE.
(iv)	Current collection test (OLIVER-G)
STC-TRD-04	Power Supply Installations – I	6 days
(i)	Duties of SSE and JE (PSI)
(ii)	Traction Power Transformers
(iii)	Circuit breaker, Interruptor and Isolator
(iv)	Auxiliary Transformer
(v)	Current Transformer
(vi)	Potential Transformer
(vii)	Lighting Arrestor
(viii)	Capacitor Bank
(ix)	Bonding and Earthing
(x)	Batteries and Battery chargers
(xi)	Numbering Scheme in PSI
STC-TRD-05	Power Supply Installations – II	6 days
(i)	Protective system and Relay setting calculations.
(ii)	Maintenance Schedule for power supply installations.
(iii)	Energy conservation measures for Traction installations
(iv)	Safety during working at power supply installations
(v)	Uses of Thermo – Vision Camera, CONDITIONING Monitoring PSI Equipment’s.
STC-TRD-06	2X25 kV ac Traction System	2 days
(i)	Introduction and description of 2X25kV ac Traction System
STC-TRD-07	Remote Control and SCADA system	3 days
(i)	Introduction
(ii)	Duties of SSE and JE (RC)
(iii)	Salient features of SACDA
(iv)	System Description
STC-TRD-08	Traction Power Control	2 days
(i)	Operation
(ii)	Duties of CTPC and TPC
(iii)	Power blocks and PTW
(iv)	Joint procedure order
(v)	Open Access, Transmission lines
STC-TRD-09	Breakdown and Electrical accidents	2 days
(i)	Sub-station and switching station breakdown
(ii)	Breakdown of RC equipment
(iii)	OHE breakdown
(iv)	Electrical accidents
(v)	Emergency stores and breakdown equipment
STC-TRD-10	Railway Electrification	2 days
(i)	Introduction
(ii)	Survey Team & its work
(iii)	Abstract Estimate and Cost Benefit Analysis
(iv)	Format of the project report
(v)	Commissioning of Electrical Installations and EIG Sanction
STC-TRD-11	Safety precautions on electrified section	2 days
(i)	Station working rules
(ii)	Induction effects of 25kV ac 50Hz Single Phase Traction
(iii)	Working of steam and diesel locomotives in electrified section
(iv)	Loading and unloading of petroleum products
(v)	Rules applicable to Permanent Way Staff
(vi)	Rules for S&T installations
(vii)	Over-dimensioned consignments & JPOs
(viii)	Competency certificates
(ix)	Others precautions
(x)	Regulations for Power Line Crossings of railway Tracks
(xi)	New Technology & case studies
PFGD	Presentation feedback & group discussions Examination/ Viva voice (Topic for presentation will be assigned by IRIEEN in groups)	2 days
PHASE -II	TOTAL DURATION	08 WEEKS
4(b)	PHASE II -TRS
	Specialised Training Course (STC) in Traction Rolling Stock (TRS)/ Loco/ EMU/ MEMU including Drawing Group
Duration		08 Weeks
Place	IRIEEN
Module No.	Brief Description	Duration
STC-TRS-01	INTRODUCTION OF	3 Days
(i)	Basic features of Conventional Locomotive
(ii)	Basic features of Three Phase locomotive
(iii)	Basic features of Conventional EMU
(iv)	Basic features of Three Phase EMU
(v)	Basic features of Conventional MEMU
(vi)	Basic features of Three Phase MEMU
STC-TRS-02	DETAIL OF CAB EQUIPMENT OF	3 Days
(i)	Conventional Locomotive
(ii)	Three Phase locomotive
(iii)	Conventional EMU
(iv)	Three phase EMU
(v)	Conventional MEMU
(vi)	Three Phase MEMU
STC-TRS-03	DETAIL OF BOGIE OF	3 Days
(i)	Conventional Locomotive
(ii)	Three Phase locomotive
(iii)	Conventional EMU
(iv)	Three phase EMU
(v)	Conventional MEMU
(vi)	Three Phase MEMU
STC-TRS-04	DETAIL OF ROOF EQUIPMENTS OF	3 Days
(i)	Conventional Locomotive
(ii)	Three Phase locomotive
(iii)	Conventional EMU
(iv)	Three phase EMU
(v)	Conventional MEMU
(vi)	Three Phase MEMU
STC-TRS-05	Pneumatic System Of	3 Days
(i)	Conventional Locomotive
(ii)	Three Phase locomotive
(iii)	Conventional EMU
(iv)	Three phase EMU
(v)	Conventional MEMU
(vi)	Three Phase MEMU
STC-TRS-06	DETAIL OF MACHINE ROOM	3 Days
(i)	Machine Room Items of Conventional Locomotive
(ii)	Machine Room Items of Three Phase locomotive
(iii)	Motor Coach Conventional EMU
(iv)	Driving Coach of Three phase EMU
(v)	Motor Coach of MEMU
(vi)	Driving Coach Three Phase MEMU
STC-TRS-07	DETAIL OF UNDER FRAME ITEMS OF	2 Days
(i)	Conventional Locomotive
(ii)	Three Phase locomotive
(iii)	Conventional EMU
(iv)	Three phase EMU
(v)	Conventional MEMU
(vi)	Three Phase MEMU
STC-TRS-08	Power Circuit Diagram Of	2 Days
(i)	Conventional Locomotive
(ii)	Three Phase locomotive
(iii)	Conventional EMU
(iv)	Three phase EMU
(v)	Conventional MEMU
(vi)	Three Phase MEMU
STC-TRS-09	Auxiliary Circuit Diagram of	2 Days
(i)	Conventional Locomotive
(ii)	Three Phase locomotive
(iii)	Conventional EMU
(iv)	Three phase EMU
(v)	Conventional MEMU
(vi)	Three Phase MEMU
STC-TRS-10	Control Circuit of	2 Days
(i)	Conventional Locomotive
(ii)	Three Phase locomotive
(iii)	Conventional EMU
(iv)	Three phase EMU
(v)	Conventional MEMU
(vi)	Three Phase MEMU
STC-TRS-11	Maintenance Schedule of	2 Days
(i)	Conventional Locomotive
(ii)	Three Phase locomotive
(iii)	Conventional EMU
(iv)	Three phase EMU
(v)	Conventional MEMU
(vi)	Three Phase MEMU
STC-TRS-12	Traction Motor of	2 Days
(i)	Conventional Locomotive & Three Phase locomotive
(ii)	Conventional EMU & Three phase EMU
(iii)	Conventional MEMU & Three phase MEMU
STC-TRS-13	Transformer of	2 Days
(i)	Conventional Locomotive & Three Phase locomotive
(ii)	Conventional EMU & Three phase EMU
(iii)	Conventional MEMU & Three phase MEMU
STC-TRS-14	Safety items of	2 Days
(i)	Three phase EMU
(ii)	Conventional MEMU
(iii)	Three Phase MEMU
STC-TRS-15	Testing of	2 Days
(i)	Conventional Locomotive
(ii)	Three Phase locomotive
(iii)	Conventional EMU
(iv)	Three phase EMU
(v)	Conventional MEMU
(vi)	Three Phase MEMU
STC-TRS-16	Operating Concepts of	2 Days
(i)	Conventional Locomotive
(ii)	Three Phase locomotive
(iii)	Conventional EMU
(iv)	Three phase EMU
(v)	Conventional MEMU
(vi)	Three Phase MEMU
Module No.	Brief Description	Duration
PFGD	Presentation feedback & group discussions Examination/ Viva voice (Topic for presentation will be assigned by IRIEEN in groups)	2 Days
PHASE II	TOTAL DURATION	08 WEEKS

Note: 6 periods per Day

4(C)	PHASE II-GS-POWER-TA&AC
	Specialised Training Course in General Services (Power Supply, TL&AC Coaching) including Drawing Group
Duration		08 Weeks
Place	IRIEEN
Module No.	Brief Description	Duration
STC-GS-1	Train Lighting	05 Days
(i)	Introduction to coaching stock & Train Lighting Systems, theory and practice- SG/ EOG/ HOG schemes.
(ii)	Self generating coach and equipment – Alternators, Rectifier/ Regulator, Coach wiring, lighting and fans etc.
(iii)	Batteries including VRLA
(iv)	V belts and Pulleys
(v)	Maintenance schedules of ICF TL coaches
(vi)	LHB Non AC coaches, familiarization with major equipment and ratings
(vii)	Coach Maintenance depot management, yard stick
(viii)	Rake links, Coach Coding
(ix)	Relevant Manuals, RDSO, SMIs and Modification Sheets pertaining to TL coaches
STC-GS-2	Air Conditioning	10 Days
	Fundamentals of Air Conditioning.
	Air conditioning systems in various coaches,
	LHB AC coaches, familiarization with major equipment ratings,
	Maintenance schedules of LHB AC coaches,
	Maintenance schedules and practices of LHB Non AC coaches,
	Water raising apparatus
	Introduction of Power car, its equipments, Maintenance & troubleshooting
	Introduction of Pantry car, its equipments , Maintenance & troubleshooting
	Relevant Manuals, RDSO SMIs and Modification Sheets pertaining to AC coaches.
STC-GS-3	Operation and trouble shooting in TL & AC Coaches	5 Days
	Operating Instructions for SG TL & AC coaches
	Trouble shooting in Self Generating coaches
	Trouble shooting LHB AC coaches
	Fire causes and preventive measures in Railway coaches
	Field trip to nearby coaching depot for understanding of LHB and conventional coaches
STC-GS-4	LHB CIRCUIT DIAGRAM	3 Days
	Detailed Study of LHB AC Coach circuit Diagram
	Detailed Study of LHB Power Car circuit Diagram
	Detailed Study of LHB Pantry Car circuit Diagram
STC-GS- 5	Power Supply Installations (General Services)	5 Days
	Power distribution systems
	Distribution Substation-Design & layout, Equipments, Protection system, lines etc.
	Condition monitoring & Preventative maintenance of sub-station equipments
	Earthing – Types, uses & maintenance, Earth Electrodes
	Building Electrification, wire & cables
	Electric accident – causes & prevention
	Emergency supply arrangements- DG set, UPS etc.
STC-GS-6	Pumping Installations, UPS, and illumination	5 Days
	Water supply pumping installations, types of pumps, their specifications and selection for various applications,
	Maintenance & trouble shooting of pumps, Automation of pumps
	Illumination Engineering – Theory, Application & latest development, Railway Board guidelines
STC-GS-7	Passenger Amenities	5 Days
	Lift & Escalators
	Water coolers , Platform utilities
	Renewable Energy sources – Theory & application Uses of solar & wind energy in Railway Energy conservation measures
	Relevant codes, RDSO SMIs and Modification pertaining to power supply and energy efficiency
	Field trip to nearby power supply installations/ manufacturer for practical understanding
PFGD	Presentation feedback & group discussions Examination/ Viva voice (Topic for presentation will be assigned by IRIEEN in groups)	2 days
PHASE II	TOTAL DURATION	08 WEEKS

Note: 6 periods per Day

For Common to All Streams

including

Drawing Cadre

AT

OWN HQ/DIVISION

	5. GENERAL AND SUBSIDIARY RULES, SAFETY, FIRST AID, FIRE FIGHTING & DISASTER MANAGEMENT (Common to all streams of Electrical Engineering)
Duration		04 Weeks
Place	Nominated ZRTI/ ETC
Module No.	Brief Description	Duration
GEN-01	General and Subsidiary Rules	12 Days
	The course content for General and Subsidiary Rules training for electrical JE would be developed by respective ZRTIs. This course shall be conducted before sending trainee JE/SSE for attachment/on the job experience. (Ref: RBE No.11/2009, letter No. E(MPP)/2009/3/16, New Delhi, dated 15.01.2010)
GEN-02	Safety & Electrical accidents	3 Days
	General safety rules, Importance of PPEs and other safety apparatus.
	Preventive measures to avoid electrical accidents
	Measures to be taken in case of electrical accident.
	Case studies and discussion
GEN-03	Safety in electrified sections	3 Days
	Induction effect on the nearby LT lines and yard lighting mains.
	Safety precautions to be taken for PF shelters, fencing, FOBs, while working of cranes in the vicinity of OHE. etc.
	Operation and Importance of locking of isolating switches of OHE
	Importance of permit to work, temporary jumpering of rails in case of rail fracture.
	Case studies and discussion
GEN-04	First Aid and Fire Fighting	3 Days
	Fire causes and safety measures and various codes
	Electrical shock causes, Prevention &treatment etc.
	First aid for injury, burns etc.
	Audio/ Visual/ live demonstration of firefighting and first aid.
GEN-05	Disaster Management	3 Days
	Introduction to Disaster management, NDRF, SDRF etc.
	Organizational infrastructure to effectively combat disaster (medical accessories, relief train, essential materials).
	Accident & Break down management, preventive steps.
	Analysis of breakdowns, case studies and discussion
	6. COMPUTER TRAINING (Common to all streams of Electrical Engineering)
Duration		02 Weeks
Place	Any Computer institute/ outsourced agency or Nominated ETC.
Module No.	Brief Description	Duration
CT 01	Computer training	02 Weeks
(a)	Theory and practical to gain proficiency in MS Office – Word, Excel and Power point, e-mail, e-office, e-governance etc.
	7. FAMILIARIZATION WITH OTHER DEPARTMENTS (C&W, P-WAY & S&T) (Common to all streams of Electrical Engineering)
Duration		02 Weeks
Place	Nearby concerned units of division To make familiar with the working of other departments.
Module No.	Brief Description	Duration
OD 01	Attachment to following shall be made for making familiarization with other Departments to understand their working and joint official procedure.	02 weeks
	Working of control office/ TPC/ TLC.	Control office
	P-Way maintenance/ assets	P.Way Depot/ site
	Sick lines, C&W depot/ activities	Sick lines, C&W Depots
	Signalling/ RRI working	Signalling/RRI Depot
	08. ATTACHMENT ON THE JOB EXPERIENCE (Only For TRD Stream)
Duration		14 Weeks
Place	Allocated field unit where the trainee JE/SSE finally to be posted.
Module No.	Brief Description	Duration
	Job Experience
(a)	Final phase of training shall comprise of on the job attachment wherein after completion of institutional and field training, the trainee JE/ SSEs shall be posted in the field units allocated to them by the concerned Railways.	14 Weeks
(b)	During this period, the trainees would perform like a supervisor working on an active assignment but would not be given independent charge.
(c)	During this period, the trainees shall go through different technician training modules to understand the basic maintenance techniques.
(d)	The programme for this attachment/on the job experience would be framed by the Officer in charge of the Division/extra Divisional Field Units where these JE/ SSEs are to be finally posted.
(e)	During this period training in TPC, OHE depot, PSI depot (minimum 1 week at each place)
(f)	During this training trainee shall select current problem, study and prepare a project report containing details and probable causes and solutions. This should be shown during presentation before final exam. (item no. 10 given below)
	09. MISCELLANEOUS TRAINING
Duration		03 Weeks
Place	As per requirement in division.
Module No.	Brief Description	Duration
MT	Case studies of identified problems, promoting innovative ideas of trainees shall be explored during this period.	03 weeks
	Any training which is left over or required for the job of JE/SSE may be framed by officer in charge of divisional/ extra divisional field units. For example: If a JE or SSE is to work in OHE/PSI depot, he should visit major OHE/PSI depots of division to observe different working techniques used, he should also visit any Railway Electrification construction site nearby.
	10. PRESENTATION OF PROJECT WORK
Duration		01 Weeks
Place	Divisional / extra divisional field units
Module No.	Brief Description	Duration
PW	During attachment on the job experience training (duration 14 weeks), trainee shall select a current problem, study and prepare a project report containing details and probable causes and solutions.	01 Week
	This report shall be presented during session including all trainees so as to develop the communication and presentation skills.
	11. YOGA & MEDITATION
Module No.	Brief Description	Duration
YM	Mandatory “Yoga training” as per Railway Board’s circular no. RBE No.64/2015 circulated vide Railway Board’s letter no.E(MPP)2015/3/10, New Delhi dated 15.06.2015, shall be provided to all trainees. The copy of referred letter is enclosed as Annexure-I.	During phase I & Phase II
Place	IRIEEN
	12. POSTING EXAMINATION
Duration		01 Week
Place	Concerned Division where he/she will be posted.

Total Duration = 52 week

B. Promotee JE

(Promoted Through Seniority cum suitability basis)

(Duration – 13 Weeks)

	Revised Training Programme for Promotee JEs’ (Promoted Through Seniority cum suitability basis) of Electrical Department
Place	Respective Division/ BTC/ Zonal ETC
	Session-I (Theory)
S. No.	Training Module	No. of Days	Duration
1	Basic Orientation	1
2	Disaster Management	2
2(A)	(I) FOR Loco /EMU
	(a) Accident Performa – Engineering Parameters & Accident diagram, Rolling Stock
	(b) Derailment Investigation & Case Study
	(II) FOR TRD – TRD Safety
	(III) FOR GS – GS Safety
	(IV) FOR TL – TL Safety
3	I E Rules, Permit to Work, Energy Conservation Act	2
4	Managerial Skills	2
5	Technical English	2
6	Computer Awareness	2
7	Establishment	2
8	Material Management and Inspection	3
9	Contract Management	2
10	Instrumentation	2
11	Basics of Power Electronics	1
12	Manufacturing Technology, Engineering Material and Metallurgy	2
13	Renewable Energy Sources	1
	Sub Total (Theory General)	24	4 Weeks
14	Specialized Streams (Theory)
(a)	Coaching and General Services	24	Only in Respective Branch
(b)	Traction Distribution	24
(c)	Traction Rolling Stock and EMU	24
	Sub Total(Theory Specialized Courses)	24	4 Weeks Respective Fields Only
	Session-II (Practical Training)
15	Training at TPC and OHE Depot	18	Only in Respective Branch
16	Training at CLW and LOCO POH Shop	18
17	Training at PU and POH Shop (Coach)	18
18	On Job Training Stream Wise	6	Only in Respective Branch
	Sub Total (Practical Training)	24	4 Weeks Respective Fields Only
	Session-III (Refreshing/Exam/Viva etc.)
19	Final Exam/Viva Voce etc.	6	1 Week
	Grand Total	78	13 Week

5. REFRESHER COURSE FOR

JE/ SSEs

After every 3 years for TRD/ TRS/ GS/ TLAC,  

&

After every 5 years for Drawing cadre

Department: Electrical

Activity Centre: TRD

Trade	JE/SSEs (TRD) (Periodicity once in 3 years)
Stage	Refresher Course For JE/SSEs (TRD)/PSI /RC ( Combined)
Duration	2 Weeks
Module No.	Module Description
Gen-2.1	Material Management (Store procurement , up keep,  records, inventory management GEM , E –Tendering
Gen-2.2	Industrial Management,( DAR, Leave/Pass Rules)
Gen-2.3	Financial management (Railway Accounting and Financial procedures)
Gen-2.4	Energy conservation
Elec 2.4	Codes/ Manuals /SMIs/MIs, pertaining to TRD
Elec TRD 2.1	Maintenance Schedules OHE, Switching Stations, Traction sub-stations, Powerline crossings, SCADA Thermo-vision Camera
Elec TRD 2.2	Inspection schedules of Officers/ JE , check lists of TRD assets OLIVER – G
Elec TRD 2.4	Failure investigation/ case studies on panto entanglement, OHE, mast hitting, sub-station and SCADA failures
Elec – Safety 2.4	TRD – Safety Disaster management
	Test/Feedback

Department: Electrical

Activity Centre: General Services

Trade	Trade: JE/SSEs (Electrical) (Periodicity once in 3 years)
Stage	Refresher Course For JE/SSEs (Electrical)
Duration	2 Weeks
Module No.	Module Description
Gen-2.1	Material Management (Store procurement, up keep, records, inventory management
Gen-2.2	Industrial Management,( DAR, Leave/Pass Rules) soft skill & ethics
Gen-2.3	Financial management (Railway Accounting and Financial procedures
Gen-2.4	Energy conservation
Elec 2.4	Codes/ Manuals /SMIs/MIS, pertaining to General services
Elec 1.6	Maintenance Schedule and overhauling of energy meter, transformer, switchgears, protection devices, AC motors, alternators, DG sets and pumps ESCALATORS, LIFTS, etc.
Elec 2.5	Inspection schedules of Officers/JE , check lists of general services fire prevention measures
Elec 1.15	Failure investigation/case studies on general services and plant maintenance energy conservation measures, etc.
Elec. Safety	GS – Safety
Genl 2.5	Disaster management
	Test/Feedback

Department: Electrical

Activity Centre: Electrical

Trade	Trade: JE/SSEs (TL/AC) (Periodicity once in 3 years)
Stage	Refresher Course For JE/SSEs (TL/AC)
Duration	2 Weeks
Module No.	Module Description
Gen-2.1	Material Management (Store procurement, up keep, records, inventory management
Gen -2.2	Industrial Management, (DAR, Leave/ Pass Rules) soft skill & Ethics
Gen-2.3	Financial management (Railway Accounting and Financial procedures)
Gen-2.4	Energy conservation
Elec -1.12	Maintenance Schedule and overhauling of alternators, regulators, invertors, battery, belts, protection devices, AC plants, air conditioned coaches, roof mounted AC package unit LHB COACHES, Hotel Load
Elec -2.5	Inspection schedules of Officers/JE, check lists of TL/AC LHB Coach & fire prevention measures
Elec -1.19	Failure investigation/case studies on TL/AC
Elec – Safety	TL – Safety
Genl 2.5	Disaster management
	Test/Feedback

Special emphasis may be given on new generation coaches introduced by railway time to time.

Department: Electrical

Activity Centre: Electrical Loco Shed/ Workshop

Trade	Trade: JE/SSEs (Loco) (Periodicity once in 3 years)
Stage	Refresher Course For JE/SSEs (TRS)
Duration	2 Weeks (01 Week for technical, 01 week for non-technical)
Module No.	Module Description
Gen-2.1	Material Management (Store procurement , up keep, records, inventory management
Gen-2.2	Industrial Management,( DAR, Leave/ Pass Rules)
Gen-2.3	Financial management (Railway Accounting and Financial procedures)
Gen -2.4	Energy conservation
Elec 2.4	Codes/ Manuals/ SMIs/ MIs, pertaining to loco
Elec-Loco-2.1	Maintenance Schedules and overhauling of Electric loco and its major equipment
Elec-loco-2.4	Inspection schedules of Officers/ JE, check lists of electric locomotives
Elec-loco-2.6	Failure investigation/ case studies on electric locomotives
Elect – Safety	(i) Accident Performa – Engineering Parameters & Accident diagram, Rolling Stock
	(ii) Derailment Investigation & Case Study
Genl-2.5	Disaster management
	Test/Feedback

Department: Electrical

Activity Centre: EMU CAR SHED/WORKSHOP

Trade	Trade: JE/SSEs (EMU-TRS) (Periodicity once in 3 years)
Stage	Refresher Course For JE/SSEs (EMU-TRS)
Duration	2 Weeks
Module No.	Module Description
Gen-2.1	Material Management (Store procurement , up keep, records, inventory management)
Gen-2.2	Industrial Management, (DAR, Leave/ Pass Rules)
Gen-2.3	Financial management (Railway Accounting and Financial procedures)
Gen-2.4	Energy conservation
Elec 2.4	Codes/ Manuals/ SMIs/ MIS, pertaining to EMU
Elec-EMU-2.2 Elec-EMU-2.3 Elec-EMU-2.4	Maintenance Schedules and ovehauling of EMU equipment viz. TFP, TM, DJ, contactors, relays, lights, arno, auxiliary machines, bogies, suspension, brake rigging, wheels, gears, couplers, compressor, exhauster, valves, panto
Elec-EMU-2.5	Inspection schedules of Officers/ JE, check lists of EMU
Elec-EMU-2.7	Failure investigation/case studies on EMU
Elect – Safety	(i) Accident Performa – Engineering Parameters & Accident diagram, Rolling Stock
	(ii) Derailment Investigation & Case Study
Genl 2.5	Disaster management
	Test/Feedback

*Three phase/ Conventional as per availability in the particular shed in all above modules.

Revised Training Module

for Gr. C & D Electrical Staff (other than JE/SSEs)

INDEX

TRAINING COURSES INDEX OF ELECTRICAL DEPARTMENT

Place: All these courses will be conducted at concerned Division/ BTC/ Zonal ETC.

Course No.	Description	Duration (In Week)	Page No.
Elect 01	Initial Course for Group ‘D’ all trades	02	3
Elect 02	Disaster Management	01	4
	ELECTRICAL TRD DEPARTMENT
Elect 03	Pre-Promotional Course from Unskilled to Skilled Artisans (Technician OHE)	03	5
Elect 04	Pre-Promotional Course from Unskilled to Skilled Artisans (Technician PSI & RC)	03	6
Elect 05	Initial Course for Apprentice Technician OHE PSI & RC (ITI)	26	7-8
Elect 06	Initial Course for Apprentice Technician OHE PSI & RC (NON-ITI)	78	9-10
Elect 07	Refresher Course for Technician OHE (Once in 5 years)	02	11
Elect 08	Refresher Course for Technician PSI & RC (Once in 5 years)	02	12
Elect 09	Pre-Promotional course from Technician to JE (TRD)	03	13-14
Elect 10	Refresher Course Tower Wagon Operation & Maintenance	01	15
	ELECTRICAL (G) DEPARTMENT
Elect 11	Pre-Promotional Course from Unskilled to Skilled Artisans & Technician Plant (Technician Electrical)	03	16
Elect 12	Pre-Promotional Course from Unskilled to Skilled Artisans (Technician TL/AC)	03	17
Elect 13	Initial Course for Apprentice Technician (Elect) & Plant (ITI)	26	18-19
Elect 14	Initial Course for Apprentice Technician (Elect) & Plant (NON-ITI)	78	20-21
Elect 15	Initial Course for Apprentice Technician TL/AC (ITI)	26	22-23
Elect 16	Initial Course for Apprentice Technician TL/AC (NON- ITI)	78	24-25
Elect 17	Refresher Course for Technician (Elect) & Technician Plant (Once in 5 Years)	02	26
Elect 18	Refresher Course for Technician TL/AC (Once in 5 years)	02	27
Elect 19	Pre-Promotional course from Technician to JE(Elect)	03	28-29
Elect 20	Pre-Promotional course from Technician to JE(TL/AC)	03	30-31
	ELECTRICAL LOCO DEPARTMENT
Elect 21	Pre-Promotional Course from Unskilled to Skilled Artisans (Technician Elect Loco)	03	32
Elect 22	Initial Course for Apprentice Technician Elect Loco (ITI)	26	33-34
Elect 23	Initial Course for Apprentice Technician Elect Loco (NON-ITI)	78	35-36
Elect 24	Refresher Course for Technician Elect Loco (Once in 5 years)	02	37
Elect 25	Pre-Promotional course from Technician to JE (Elect Loco)	03	38-39
	ELECTRICAL EMU DEPARTMENT
Elect 26	Pre-Promotional Course from Unskilled to Skilled Artisans (Technician EMU)	03	40
Elect 27	Initial Course for Apprentice Technician EMU/MEMU (ITI)	26	41-42
Elect 28	Initial Course for Apprentice Technician EMU/MEMU (NON-ITI)	78	43-44
Elect 29	Refresher Course for Technician EMU (Once in 5 years)	02	45
Elect 30	Pre-Promotional course from Technician to JE(EMU)	03	46-47

(Elect 01)

DEPARTMENT: Electrical

Activity Centre: ALL

Trade: Group ‘D’ All

Stage: Training Module for initial Course for Group ‘D’ all trades

Place: All these courses will be conducted at concerned Division/ BTC/ Zonal ETC

Module No.	Module Description	Duration
EL01	Foundation
EL02	Measuring/ Portable Tools
EL03	Basic information on handling/Storing of Material
EL04	Personal Safety, electrical accidents, fire fighting
EL05	First aid
EL06	Material handling & Operation of equipments
EL07	Clearance and upkeep of Working environment
	Test/Feedback
	Total	2 Weeks

(Elect 02)

DEPARTMENT: Electrical

Activity Centre: ALL

Trade: Gr. ‘C’ & ‘D’ ALL

(Periodicity once in 5 years)

Stage: Disaster Management

Place: All these courses will be conducted at concerned Division/ BTC/ Zonal ETC

Module No.	Module Description	Duration
El-04	Personal Safety, Electrical Accidents, Fire Fighting,
El-05	First Aid
Gen-2.5	Concept of Disaster Management, Infrastructural Requirements, efficient management, coordination
	Case studies
	Test/Feedback
	Total	01 Week

(Elect 03)

DEPARTMENT: Electrical

Activity Centre: TRD

Trade: Technician OHE

Stage: Pre -Promotional Course from Unskilled to Skilled Artisans

(Technician OHE)

Place: All these courses will be conducted at concerned Division/ BTC/ Zonal ETC

Module No.	Module Description	Duration
ELEC-1.1	Basic Knowledge about tools, safety, First aid, material handling & storage, proper up keep of work area.
ELEC-1.2	General Electrical technology, and definitions of electrical terms Thermo Vision Camera
ELEC-1.3	Reading of drawing, circuit diagrams
ELEC-1.4	Basic properties of Electrical Materials,
ELEC-TRD-1.1	Names, sizes, location of major OHE equipments (cantilever, Masts, ATD, section insulator, Overlap, turn out, cross over, neutral section etc. Current collection Test (Oliver – G)
ELEC-TRD-1.2	Maintenance schedules, critical points, settings and tolerance of major OHE equipments
ELEC-TRD-1.3	Testing, erection and commissioning of major OHE equipments
	Test/Feedback
	Total	03 Weeks

(Elect 04)

DEPARTMENT: Electrical

Activity Centre: TRD

Trade: Technician PSI & RC

Stage:- Pre -Promotional Course from Unskilled to Skilled Artisans

(Technician PSI & RC)

Place: All these courses will be conducted at concerned Division/ BTC/ Zonal ETC

Module No.	Module Description	Duration
ELEC-1.1	Basic Knowledge about tools, safety, First aid, material handling & storage, proper up keep of work area.
ELEC-1.2	General Electrical technology, and definitions of electrical terms
ELEC-1.3	Reading of drawing, circuit diagrams
ELEC-1.4	Basic properties of Electrical Materials
ELEC-TRD-1.4	Names, sizes, location of major PSI, sub station and remote control equipments (Power transformers, CB, BM,CT, BT, AT, PT, Relays, Batteries, SCADA, Bonding and earthing etc.
ELEC-TRD-1.5	Maintenance schedules, critical points, settings and tolerance of major PSI, sub-station and remote control equipments Thermo Vision Camera
ELEC-TRD-1.6	Testing, erection and commissioning of major PSI, sub-station and remote control equipments
	Test/Feedback
	Total	03 Weeks

(Elect 05)

DEPARTMENT: Electrical

Activity Centre: TRD

Trade: Apprentice Technician OHE /PSI/ RC

Stage: Initial Training Course for Apprentice Technician OHE/ PSI/RC

(ITI, Direct Recruit through RRB) (Common for ALL OHE, PSI & RC)Place: All these courses will be conducted at concerned Division/ BTC/ Zonal ETC

Module No.	Module Description	Duration	Venue
	Foundation Course	3 W	ETC
ELEC-01	Foundation, measuring/ Portable tools, safety, First aid, Fire Fighting, material handling& storage, proper up keep of work area.
ELEC-1.2	General Electrical technology, and definitions of electrical terms
ELEC-1.3	Reading of drawing, circuit diagrams
ELEC-1.4	Basic properties of Electrical Materials
	Theoretical Training in the allotted streams	4 W	ETC
ELEC-TRD-1.1	Names, sizes, location of major OHE equipments (Cantilever, Masts, ATD, section insulator, Overlap, turn out, cross over, neutral section etc.)
	Foundation Course	3 W	ETC
ELEC-TRD-1.2	Maintenance schedules, critical points, settings and tolerance of major OHE equipments OLIVER – G
ELEC-TRD-1.3	Testing, erection and commissioning of major OHE Equipments Thermo-vision Camera
	Training in other related stream	2 W	ETC
ELEC-TRD-1.4	Names, sizes, location of major PSI, substation and remote control equipments (Power transformers, CB, BM, CT, BT, AT, PT, Relays, Batteries, SCADA, Bonding and earthing etc.
ELEC-TRD-1.5	Maintenance schedules, critical points, settings and tolerance of PSI, substation and remote control equipments
ELEC-TRD-1.6	Testing, erection and commissioning of PSI, sub-station and remote control equipments
	Practical training in OHE	12 W	Depots/Sites
	Technical tour	2 W	Visit to Equipment Manufacturer
	Training in Computers	2 W	Trg. Centre/ Computer Centre
	Examination/Feedback	1 W	ETC
	Total	(26 W)

(Elect 06)

DEPARTMENT: Electrical

Activity Centre: TRD

Trade: Apprentice Technician OHE/ PSI/ RC

Stage: Initial Training Course for Apprentice Technician OHE/ PSI/ RC (Non-ITI)

(Common to ALL OHE, PSI & RC)Place: All these courses will be conducted at concerned Division/ BTC/ Zonal ETC

Module No.	Module Description	Duration	Venue
	Foundation Course	3 W	ETC
ELEC-01	Foundation, measuring/ Portable tools, safety, First aid, Fire Fighting, material handling & storage, proper up keep of work area.
ELEC-1.2	General Electrical technology, and definitions of electrical terms
ELEC-1.3	Reading of drawing, circuit diagrams
ELEC-1.4	Basic properties of Electrical Materials
	Workshop Technology (Welding, Carpentry, Painting, Soldering, Machine Shop) – Theory	4 W	ETC
	Workshop Technology (Welding, Carpentry, Painting, Soldering, Machine Shop) – Practical	4 W	Shops
	Theoretical Training in the allotted streams	4 W	ETC
ELEC-TRD-1.1	Names, sizes, location of major OHE equipments (Cantilever, Masts, ATD, section insulator, Overlap, turn out, cross over, neutral section etc.)
ELEC-TRD-1.2	Maintenance schedules, critical points, settings and tolerance of major OHE equipments OLIVER- G
ELEC-TRD-1.3	Testing, erection and commissioning of major OHE Equipments Thermo Vision camera
	Training in other related stream	2 W	ETC
ELEC-TRD-1.4	Names, sizes, location of major PSI, substation and remote control equipments (Power transformers, CB, BM, CT, BT, AT, PT, Relays, Batteries, SCADA, Bonding and earthing etc.
ELEC-TRD-1.5	Maintenance schedules, critical points, settings and tolerance of PSI, substation and remote control equipments
ELEC-TRD-1.6	Testing, erection and commissioning of PSI, sub-station and remote control equipments
	Practical training in OHE	56 W	Depots/Sites
	Technical tour	2 W	Visit to Equipment Manufacturer
	Training in Computers	2 W	Trg. Centre/ Computer Centre
	Examination/Feedback	1 W	ETC
	Total	78 W

(Elect 07)

DEPARTMENT: Electrical

Activity Centre: TRD

Trade: Technician (OHE)

(Periodicity once in 5 years)

Stage: Refresher Course for Technician (OHE)Place: All these courses will be conducted at concerned Division/ BTC/ Zonal ETC

Module No.	Module Description	Duration
ELEC-1.1	Basic Knowledge about tools, safety, First aid, material handling & storage, proper up keep of work area.
ELEC-1.2	General Electrical technology, and definitions of electrical terms
ELEC-1.3	Reading of drawing, circuit diagrams
ELEC-1.4	Basic properties of Electrical Materials
ELEC-TRD-1.1	Names, sizes, location of major OHE equipments (Cantilever, Masts, ATD, section insulator, Overlap, tur n out, cross over, neutral section etc)
ELEC-TRD-1.2	Maintenance schedules, critical points, settings and tolerance of major OHE equipments Thermo Vision Camera
ELEC-TRD-1.3	Testing, erection and commissioning of major OHE Equipments Current collection Test/ OLIVER – G
ELEC-TRD-1.7	Codes/ Manuals/ SMIs/ MIs on TRD
ELEC-TRD-1.8	Case studies on failures on OHE
	Test/Feedback
	Total	02 Weeks

(Elect 08)

DEPARTMENT: Electrical

Activity Centre: TRD

Trade: Technician PSI/RC

(Periodicity once in 5 years)

Stage: Refresher Course for Technician (PSI/ RC)Place: All these courses will be conducted at concerned Division/ BTC/ Zonal ETC

Module No.	Module Description	Duration
ELEC-1.1	Basic Knowledge about tools, safety, First aid, material handling & storage, proper up keep of work area.
ELEC-1.2	General Electrical technology, and definitions of electrical Terms Thermo-vision Camera
ELEC-1.3	Reading of drawing, circuit diagrams
ELEC-1.4	Basic properties of Electrical Materials
ELEC-TRD-1.4	Names, sizes, location of major PSI, substation and remote control equipments (Power transformers, CB, BM, CT, BT, AT, PT, Relays, Batteries, SCADA, Bonding and earthing etc.
ELEC-TRD-1.5	Maintenance schedules, critical points, settings and tolerance of major PSI, substation and remote control equipments
ELEC-TRD-1.6	Testing, erection and commissioning of major PSI, sub-station and remote control equipments
ELEC-TRD1.7	Codes/Manuals/ SMIs/ MIS on TRD
ELEC-TRD-1.9	Case studies on failures of PSI and remote control
	Test/Feedback
	Total	2 Weeks

(Elect 09)

DEPARTMENT: Electrical

Activity Centre: TRD

Trade: JE

Stage: Pre-Promotional Course from Sr. Technician/ MCM to JE (TRD)

Place: All these courses will be conducted at concerned Division/ BTC/ Zonal ETC Duration 03 Weeks; Venue – Respective- BTC

Module No.	Module Description	Duration
Elec- 01	Introduction to railway organization and electric department set up
Elec- 2.1	General Electrical technology, measuring tools/ equipments
Elec-2.2	Safety Rules, precautions, earthling of equipment, accidents, fire fighting, First Aid, safety at work place.
Elec-2.3	Material handling, jigs and fixtures, up keep of work environment
Gen-2.1	Material Management (Store procurement, up keep, records, inventory management
Gen-2.2	Industrial Management, ( DAR, Leave/ Pass Rules)
Gen-2.3	Financial management (Railway Accounting and Financial procedures)
Gen-2.4	Energy conservation
Elec-2.4	Codes/ Manuals/ SMIs/ MIs, pertaining to TRD
Elec-TRD-2.1	Maintenance Schedules OHE, Switching Stations, Traction sub-stations, Powerline crossings, SCADA Thermo-vision Camera & Current Collection Test/ OLIVER –G
Elec-TRD-2.2	Inspection schedules of Officers/ JE, check lists of TRD assets
Elec-TRD-2.3	Testing/ erection/ commissioning of various TRD equipment
Elec-TRD-2.4	Failure investigation/ case studies on panto entanglement, OHE, mast hitting, substation and SCADA failures
Genl-2.5	Disaster management
	Test/Feedback
	Total	3 Weeks

(Elect 10)

DEPARTMENT: Electrical Activity Centre: TRD

Trade: Tower Wagon

(Periodicity once in 3 years)

Stage: Refresher Course Tower Wagon Operation And Maintenance

Place: All these courses will be conducted at concerned Division/ BTC/ Zonal ETC

Module No.	Module Description	Duration
Elec-TRD-1.10	Introduction to Tower Wagon and its types
Elec-TRD-1.11	Location of Important parts and their functions, Prime Mover, Power Transmission, G&SR
Elec-TRD-1.12	Maintenance schedules, critical points, settings and tolerances
Elec-TRD-1.13	Testing, erection and commissioning of a tower wagon
Elec-TRD-1.14	Trouble shooting of a tower wagon
	Test/Feedback
	Total	1 Week

(Elect 11)

DEPARTMENT: Electrical

Activity Centre: Electrical (G)

Trade: Technician (Electrical & Plant)

Stage: Pre-Promotional Promotional Course from Unskilled to Technician (Electrical)

Place: All these courses will be conducted at concerned Division/ BTC/ Zonal ETC

Module No.	Module Description	Duration
ELEC-1.1	Basic Knowledge about tools, safety, First aid, material handling & storage, proper up keep of work area.
ELEC-1.2	General Electrical technology, and definitions of electrical terms
ELEC-1.3	Reading of drawing, circuit diagrams
ELEC-1.4	Basic properties of Electrical Materials
ELEC-1.5	Names, sizes, location of major power supply equipments (transformers, Relays, contactors, Batteries, Lift ,wiring, electric fittings, meters, switch board , yard lighting and Power line crossing, cranes) Motors, Starters, LED Lighting, Energy Conservation , DG Set , Pumps
ELEC-1.6	Maintenance schedules, critical points, settings and tolerance of major power supply equipments & Earthing Maintenance
ELEC-1.7	Testing, erection and commissioning of major power supply equipments
Genl-1.1	Basics of carpentry and mason trade
	Test/Feedback
	Total	3 Weeks

(Elect 12)

DEPARTMENT: Electrical

Activity Centre: Electrical (G) Trade: Technician (TL/AC)

Stage: Pre-Promotional Course from Unskilled to Technician (TL/AC)Place: All these courses will be conducted at concerned Division/ BTC/ Zonal ETC

Module No.	Module Description	Duration
ELEC-1.1	Basic Knowledge about tools, safety, First aid, material handling & storage, proper up keep of work area. LHB Coach, Power Car, Pantry car circuit diagram
ELEC-1.2	General Electrical technology, and definitions of electrical terms
ELEC-1.3	Reading of drawing, circuit diagrams
ELEC-1.4	Basic properties of Electrical Materials
ELEC-1.11	Names, sizes, location of generating equipments , belts, batteries, electrical fittings, AC plant, Air conditioning of coach, roof mounted, AC package unit
ELEC-1.12	Maintenance schedules, critical points, settings and tolerance of TL/AC equipments Fire Prevention & Safety
ELEC-1.13	Testing, erection and commissioning of TL/AC equipments
	Test/Feedback
	Total	3 Weeks

(Elect 13)

DEPARTMENT: Electrical

Activity Centre: Electrical (G)

Trade: Apprentice Technician Electrical

Stage: Initial Training Course for Apprentice Technician (Electrical)

(ITI, Direct Recruit through RRB)Place: All these courses will be conducted at concerned Division/ BTC/ Zonal ETC

Module No.	Module Description	Duration	Venue
	Foundation Course	3 W
ELEC-01	Foundation, measuring/Portable tools, safety, First aid, Fire Fighting, material handling& storage, proper up keep of work area.
ELEC-1.2	General Electrical technology, and definitions of electrical terms
ELEC-1.3	Reading of drawing, circuit diagrams
ELEC-1.4	Basic properties of Electrical Materials
	Theoretical Training in the allotted streams	4 W	ETC
ELEC-1.5	Names, sizes, location of major Electrical equipments (Transformers, Relays, contactors, Batteries, Lift, wiring, electric fittings, meters, switch board, yard lighting and Power line crossing, Escalators, lift, UPS, LED Lighting , DG
ELEC-1.6	Maintenance schedules, critical points, settings and tolerance of major power supply equipments
ELEC-1.7	Testing, erection and commissioning of major power supply equipments
	Training in other related streams	2 W	ETC
Elec 1.8	Name, size, location of various plants Escalators, lifts, UPS, (pumps, DG sets)
Elec 1.9	Maintenance schedules, critical points, settings and tolerance of major plants Escalators, lifts, UPS (pumps, DG sets)
Elec. 1.10	Testing, erection and commissioning of plants (pumps, DG sets)
	Practical training in Power supply	12 W	Depots/Shops
	Technical tour	2 W	Visit to Equipment Manufacturer
	Training in Computers	2 W	Trg. Centre/ Computer Centre
	Examination	1 W	ETC
	Total	(26 W)

(Elect 14)

Activity Centre: Electrical (G)/ Plants

Trade: Apprentice Technician (Electrical)

Stage: Initial Training Course for Apprentice Technician (Electrical)

(Non-ITI)Place: All these courses will be conducted at concerned Division/ BTC/ Zonal ETC

Module No.	Module Description	Duration	Venue
	Foundation Course	3 W	ETC
ELEC-01	Foundation, measuring/Portable tools, safety, First aid, Fire Fighting, material handling& storage, proper up keep of work area.
ELEC-1.2	General Electrical technology, and definitions of electrical terms
ELEC-1.3	Reading of drawing, circuit diagrams
ELEC-1.4	Basic properties of Electrical Materials
	Workshop Technology (Welding, Carpentry, Painting, Soldering, Machine Shop) – Theory	4 W	ETC
	Workshop Technology (Welding, Carpentry, Painting, Soldering, Machine Shop) – Practical	4 W	Shops
	Theoretical Training in the allotted streams	4 W	ETC
ELEC-1.5	Names, sizes, location of major Electrical equipments (Transformers, Relays, contactors, Batteries, Lift, wiring, electric fittings, meters, switch board, yard lighting and Power line crossing, Escalators, Lifts UPS, LED lighting, DG Sets, pumps), cable etc.
ELEC-1.6	Maintenance schedules, critical points, settings and tolerance of major power supply equipments
ELEC-1.7	Testing, erection and commissioning of major power supply equipments
	Training in other related streams	2 W	ETC
Elec-1.8	Name, size, location of various plants Lifts & Escalators, UPS (pumps, DG sets)
Elec-1.9	Maintenance schedules, critical points, settings and tolerance of major plants (pumps, DG sets), Lifts & Escalators
Elec-1.10	Testing, erection and commissioning of plants (pumps, DG sets)
	Practical training in Power supply	56 W	Depots/Shops
	Technical tour	2 W	Visit to Equipment Manufacturer
	Training in Computers	2 W	Trg. Centre/ Computer Centre
	Examination	1 W	ETC
	Total	78 W

(Elect 15)

Activity Centre: Electrical (G)

Trade: Apprentice Technician (TL/AC)

Stage: Initial Training Course for Apprentice Technician (TL/AC)

(ITI, Direct Recruit through RRB)Place: All these courses will be conducted at concerned Division/ BTC/ Zonal ETC

Module No.	Module Description	Duration	Venue
	Foundation Course	3 W	ETC
Elect-01	Foundation, measuring/ Portable tools, safety, First aid, Fire Fighting, material handling & storage, proper up keep of work area. Soft skill & Ethics.
ELEC-1.2	General Electrical techno logy, and definitions of electrical terms
ELEC-1.3	Reading of drawing, circuit diagrams
ELEC-1.4	Basic properties of Electrical Materials
	Theoretical Training in the allotted streams	4 W	ETC
ELEC-1.11	Names, sizes, location of TL/AC equipments viz. generating equipments, belts, batteries, electrical fittings, AC plant, Air conditioning of coach, roof mounted, AC package unit LHB coach, Pantry car & Power car)
ELEC-1.12	Maintenance schedules, critical points, settings and tolerance of TL/AC equipments LHB coach, Pantry car & Power car) & fire prevention measures
ELEC-1.13	Testing, erection and commissioning of TL/AC equipments trouble shooting
	Training in other related streams	2 W	ETC
Elec-1.8	Name, size, location of various plants (pumps, DG sets) LHB coach, Pantry car & Power car
Elec-1.9	Maintenance schedules, critical points, settings and tolerance of major plants (pumps, DG sets) LHB coach, Pantry car & Power car
Elec-1.10	Testing, erection and commissioning of plants (pumps, DG set)
	Practical training in TL/AC	12 W	Depots/Shops
	Technical tour	2 W	Visit to Equipment Manufacturer
	Training in Computers	2 W	Trg. Centre/ Computer Centre
	Examination	1 W	ETC
	Total	(26 W)

(Elect 16)

Activity Centre: Electrical (G)

Trade: Apprentice Technician (TL/AC)

Stage: Initial Training Course for Apprentice Technician (TL/AC) (Non-ITI )

Place: All these courses will be conducted at concerned Division/ BTC/ Zonal ETC

Module No.	Module Description	Duration	Venue
	Foundation Course	3 W	ETC
ELEC-01	Foundation, measuring/ Portable tools, safety, First aid, Fire Fighting, material handling & storage, proper up keep of work area. Soft skill & ethics, safety.
ELEC-1.2	General Electrical technology, and definitions of electrical terms
ELEC-1.3	Reading of drawing, circuit diagrams
ELEC-1.4	Basic properties of Electrical Materials
	Theoretical Training in the allotted streams	4 W	ETC
	Workshop Technology (Welding, Carpentry, Painting, Soldering, Machine Shop) – Theory		ETC
	Workshop Technology (Welding, Carpentry, Painting, Soldering, Machine Shop) – Practical		Shops
	Theoretical Training in the allotted streams		ETC
ELEC-1.11	Names, sizes, location of TL/AC equipments viz. generating equipments, belts, batteries, electrical fittings, AC plant, Air conditioning of coach, roof mounted, AC package unit LHB coach, Pantry car & Power car) & Fire prevention measures.
ELEC-1.12	Maintenance schedules, critical points, settings and tolerance of TL/AC equipments
ELEC-1.13	Testing, erection and commissioning of TL/AC equipments
	Training in other related streams	2 W	ETC
Elec-1.8	Name, size, location of various plants (pumps, DG sets)
Elec-1.9	Maintenance schedules, critical points, settings and tolerance of major plants (pumps, DG sets) LHB coach, Pantry car & Power car)
Elec-1.10	Testing, erection and commissioning of plants (pumps, DG sets)
	Practical training in TL/AC	56 W	Depots/Shops
	Technical tour	2 W	Visit to Equipment Manufacturer
	Training in Computers	2 W	Trg. Centre/ Computer Centre
	Examination	1 W	ETC
	Total	78 W

(Elect 17)

DEPARTMENT: Electrical

Activity Centre: Electrical (G) Trade: Technician (Electrical)

(Periodicity once in 5 years)

Stage: Refresher Course for Technician (Electrical)Place: All these courses will be conducted at concerned Division/ BTC/ Zonal ETC

Module No.	Module Description	Duration
ELEC-1.1	Basic Knowledge about tools, safety, First aid, material handling & storage, proper up keep of work area.
ELEC-1.2	General Electrical technology, and definitions of electrical terms
ELEC-1.3	Reading of drawing, circuit diagrams
ELEC-1.4	Basic properties of Electrical Materials
ELEC-1.5	Names, sizes, location of major Electrical power supply equipments (Transformers, Relays, contactors, Batteries, Lift, wiring, electric fittings, meters, switch board, yard lighting and Power line crossing) Escalators, lifts, UPS, DG Sets. Pumps, starter, Fire prevention measures
ELEC-1.6	Maintenance schedules, critical points, settings and tolerance of major power supply equipments
ELEC-1.7	Testing, erection and commissioning of power supply equipments
ELEC-1.14	Codes/ Manuals/ SMIs/ MIS on Power supply maintenance
ELEC-1.15	Case studies on failures on Power maintenance
	Test/Feedback
	Total	02 Weeks

(Elect 18)

DEPARTMENT: Electrical

Activity Centre: Electrical (G)

Trade: Technician (TL/AC)

(Periodicity once in 5 years)

Stage: Refresher Course for Technician (TL/AC)Place: All these courses will be conducted at concerned Division/ BTC/ Zonal ETC

Module No.	Module Description	Duration
ELEC-1.1	Basic Knowledge about tools, safety, First aid, material handling & storage, proper up keep of work area, safety.
ELEC-1.2	General Electrical technology, and definitions of electrical terms
ELEC-1.3	Reading of drawing, circuit diagrams
ELEC-1.4	Basic properties of Electrical Materials
ELEC-1.11	Names, sizes, location of generating equipments , belts, batteries, electrical fittings, AC plant, Air conditioning of coach, roof mounted, AC package unit LHB coach features, and fire prevention measures.
ELEC-1.12	Maintenance schedules, critical points, settings and tolerance of TL/AC equipments
ELEC-1.13	Testing, erection and commissioning of TL/AC
ELEC-1.18	Codes/ Manuals/ SMIs/ MIS on TL/AC maintenance
ELEC-1.19	Case studies on failures on TL/AC
	Test/Feedback
	Total	02 Weeks

(Elect 19)

DEPARTMENT: Electrical

Activity Centre: Electrical (G)

Trade: JE (Electrical)

Stage: Pre-Promotional Course from Sr. Technician/MCM to JE (Electrical)

Place: All these courses will be conducted at concerned Division/ BTC/ Zonal ETC

Module No.	Module Description	Duration
Elec-01	Introduction to railway organization and electric department set up
Elec-2.1	General Electrical technology, measuring tools/ equipments
Elec–2.2	Safety Rules, precautions, earthling of equipment, accidents, fire fighting, First Aid, safety of workplace.
Elec-2.3	Material handling, jigs and fixtures, up keep of work environment
Gen-2.1	Material Management (Store procurement, up keep, records, inventory management
Gen-2.2	Industrial Management,( DAR, Leave/ Pass Rules)
Gen-2.3	Financial management (Railway Accounting and Financial procedures)
Gen-2.4	Energy conservation
Elec–2.4	Codes/ Manuals/SMIs/ MIS, pertaining to General services
Elec–1.6	Maintenance Schedule and overhauling of transformer, switchgears, protection devices, AC motors, alternators
Elec–1.9	Maintenance Schedule and overhauling of DG sets and pumps
Elec-2.5	Inspection schedules of Officers/ JE, check lists of general services
Elec-1.7	Testing/ erection/ commissioning of various power supply equipment
Elec-1.10	Testing/ erection/ commissioning of DG Sets and pumps
Elec–1.15	Failure investigation/case studies on power supply
Elec–1.17	Failure investigation/ case studies on failure of plants (DG sets & pumps)
Genl–2.5	Disaster management
	Test/Feedback
	Total	03 Weeks

(Elect 20)

DEPARTMENT: Electrical

Activity Centre: Electrical (G)

Trade: JE (TL/AC)

Stage: Pre-Promotional Course from Sr.Technician/ MCM to JE (TL/AC)Place: All these courses will be conducted at concerned Division/BTC/ Zonal ETC

Module No.	Module Description	Duration
Elec-01	Introduction to Railway organization and electric department set up
Elec-2.1	General Electrical technology, measuring tools/ equipments
Elec–2.2	Safety Rules, precautions, earthling of equipment, accidents, fire fighting, First Aid, safety of workplace.
Elec-2.3	Material handling, jigs and fixtures, up keep of work environment
Gen-2.1	Material Management (Store procurement, up keep, records, inventory management
Gen-2.2	Industrial Management, (DAR, Leave/ Pass Rules)
Gen-2.3	Financial management (Railway Accounting and Financial procedures
Gen-2.4	Energy conservation
Elec-2.4	Codes/ Manuals/SMIs/ MIS pertaining to General services
Elec–1.12	Maintenance Schedule and overhauling of alternators, regulators, invertors, battery, belts, protection devices, AC plants, air conditioned coaches, roof mounted AC package unit, Hotel Load.
Elec–2.5	Inspection schedules of Officers/ JE, check lists of Coaching TL/AC
Elec-1.13	Testing/ erection/ commissioning of various TL/AC equipment
Elec-1.19	Failure investigation/ case studies on TL/AC
Genl-2.5	Disaster management
	Test/Feedback
	Total	03 Weeks

(Elect 21)

DEPARTMENT: Electrical

Activity Centre: Electrical Loco Shed

Trade: Technician (TRS)

Stage: Pre-Promotional Course from Unskilled to Technician (TRS)

Place: All these courses will be conducted at concerned Division/ BTC/ Zonal ETC

Module No.	Module Description	Duration
ELEC-1.1	Basic Knowledge about tools, safety, First aid, material handling& storage, proper up keep of work area safety.
ELEC-1.2	General Electrical technology, and definitions of electrical terms
ELEC-1.3	Reading of drawing, circuit diagrams
ELEC-1.4	Basic properties of Electrical Materials
ELEC-Loco-1.1	Over view of Power , auxiliary and control circuit
ELEC-Loco-1.2	Names, sizes, location of major Electric loco equipments (Power transformer, circuit breaker, Panto, Traction and auxiliary motors, Relays, line and auxiliary contactors, Batteries, MP, head light and marker light, bogie, wheels, couplers, brake rigging, compressor, exhausters and pneumatic valves) of Convectional Loco or Three Phase Loco (Types of loco available in particular shed)
ELEC-Loco-1.3	Maintenance schedules, critical points, settings and tolerance of Electric loco equipments.
ELEC-Loco-1.4	Testing, erection and commissioning of Electric loco equipments.
	Test/Feedback
	Total	3 Weeks

(Elect 22)

DEPARTMENT: Electrical

Activity Centre: Electrical (TRS)

Trade: Apprentice Technician (TRS)

Stage: Initial Training Course for Apprentice Technician (TRS)

(ITI, Direct Recruit through RRB)

Place: All these courses will be conducted at concerned Division/ BTC/ Zonal ETC