Training Modules: RBE No.02/2024 – Civil Engineering Department
No.E(MPP)/2019/03/46, dated 09.01.2024
Sub: Revised Training Modules of Non-Gazetted Staff of Civil Engineering Department.
1. Vide Board’s letter No.E(MPP) 2019/03/46, dt. 24.12.2021 (RBE No.94/2021), revised training module of non-gazetted staff of civil engineering department was circulated to all Zonal Railways/ PUs and uploaded on railnet under heading MPP Training Circulars.
2. IRICEN has now submitted the revised training module for induction training of JE/SSE (P.Way, Works & Bridge) only for those JEs (P.Way, Works & Bridge) who are promoted from P.Way/Works/Bridge cadre, which has been reviewed in Board’s office and the same has been approved by Board (Member/ Infrastructure).
3. It may be noted that above revised training modules of JE/SSEs will not be applicable to direct recruits and their training will continue to be imparted as per Board’s letter no.E(MPP) 2019/03/46, dt. 24.12.2021 (RBE No.94/2021).
4. Accordingly, the revised training modules, for induction training of JE/SSE (P.Way, Works & Bridge) promoted from the cadre have been scanned and uploaded under MPP Training Circulars and can be viewed or downloaded from Railnet/ Indian Railways website.
5. This disposes of NR’s letter no.1-WO/Training of Non-Gazetted P.Way Staff, dated 05.09.2022.
6. Kindly acknowledge receipt.
| INDUCTION COURSE (SSE/JE/P.WAY (T-1) (Revised) | |||||
| REVISED TRAINING DURATION – 10 MONTHS | |||||
| SN | Type of Training | Place of Training | Duration | Remarks | |
| Existing | Revised | ||||
| 1 | Induction | Training Institute | 4 month | 4 Months | Detailed training programme as per Annexure T-1 (a) |
| 2 | Induction PH-1 | Training in field | 2 month | 1 month | Training will be given exposure of working in open line and construction organization for a duration of one month each to make him conversant with following:- Open line – duration Two weeks Following objective to be achieved by trainee: He should be thoroughly conversant with inspection and filling of Prorforma like; (1) LWR, SEJ, (2) Points & Crossing, (3) Curve, (4) Level Crossing, (5) Welding site, (6) Reporting & Filling of RF/WF Proforma, (7) Work with track units, (8) Special work site and leaning of keeping various records and quality control. Construction org – duration Two weeks (1) Bridge work site, (2) Track linking/ Renewal site, (3) Laying of turnout/ curve, (4) Work site protection near running lines, (5) Formation/ Cess Repair site. |
| 3 | Induction PH-2 | Training Institute | 2 month | 2 month | Detailed training programme as per Annexure T-1 (b) |
| 4 | Induction PH-2 | Training in field | 2 month | 1 month | Trainee will be given exposure of working in open line for One month to make him conversant with following – Open line – One month All maintenance activity like; (1) Short/ long duration works, (2) TMS data / inspection entries, (3) Pre/post/during attention at track machine working site, (4) USFD testing, (5) Attention to various track component, (6) Hot/ cold/ monsoon Patroling, (7) Trolly/ lorry/ material train working. |
| 5 | Induction PH-3 | Training in field | 6 week | 6 week | “On the Job training” i.e. attachment with SSE/P.Way Open Line/ Construction Department where he is likely to be Posted. |
| 6 | Posting Exam | Training Institute | 2 week | 2 week | Detailed training programme as per Annexure T-1 (C) |
| Total | 12 Months | 10 Months | |||
INDUCTION COURSE (SSEIJE/BRIDGE) (B-1) (Revised)
REVISED TRAINING DURATION: 10 MONTHS
| SN | Type of Training | Place of Training | Duration | Remarks | |
| Existing | Revised | ||||
| 1 | Induction PH-1 | Training Institute | 8 Week | 8 Week | Detailed training programme (PH 1) as per Annexure B-1 (a) |
| 2 | Induction PH-II | Engineering Workshop, RDSO and Tiruchirapalli | 10 Week | 10 Week | Training module for engineering workshop, RDSO and welding training at Tiruchirapali as per Annexure B-1 (b) |
| 3 | Induction PH-III | Training in field | 10 Week | 6 Week | Training module for field training in open line as per Annexure B-1(c) (Revised) |
| 4 | Induction PH-IV | Training Institute | 7 Week | 7 Week | Training module for technical training as per Annexure B-1(d) |
| 5 | Induction PH-V | Training in field | 10 Week | 6 Week | Training module for field training in Construction unit as per Annexure B-1 (e) |
| 6 | Induction PH-VI | Training Institute | 4 Week | 4 Week | Training module for General training at ZRTI as per Annexure B-1 (f) |
| 7 | Induction PH-VII | Training Institute | 3 Weeks | 3 Weeks | Posting exam as per Annexure B-1(g) |
| Total | 52 Weeks (12 Months) | 44 Weeks (10 Months) | |||
| INDUCTION COURSE PH-III (SSE/JE/BRIDGE)(B-1c) (Revised) | |||
| REVISED TRAINING DURATION: 6 WEEK | |||
| TOPIC | TOPIC DETAILS | Periods | |
| Existing | Revised | ||
| 1 | Inspction & maintenance of Bridge | 136 | 72 |
| 2 | Rehabilitation of Bridges | 88 | 32 |
| 3 | Plant and machinery of the engineering department | 24 | 16 |
| 4 | Fabrication of & Erection of Steel structures | 96 | 48 |
| 5 | Tender and contract management | 32 | 32 |
| 6 | Interaction with other departments | 8 | 8 |
| 7 | Disaster management in open line Accident and breaches | 16 | 16 |
| 8 | Official Procedures (Writing note, proposals, Estimate) | 16 | 16 |
| 9 | Bridge Management System | 32 | 16 |
| 10 | Stores | 16 | 16 |
| 11 | Modern Technologies, Modern Bridge repair Techniques and Trial items/ material | 16 | 16 |
| Total | 480 | 288 | |
| 480 Period, i.e., 60 days | 288 Period, i.e., 36 days | ||
| 10 Weeks | 6 Weeks | ||
| INDUCTION COURSE PH–V (SSE/JE/BRIDGEXB-1e) (Revised) | |||
| REVISED TRAINING DURATION: 6 WEEK | |||
| TOPIC | TOPIC DETAILS | WEEK | |
| Existing | Revised | ||
| 1 | Construction of various |components of RCC & PSC bridges & launching of PSC girders. | 6 Week | 4 Week |
| 2 | Fabrication & launching of Steel girders | 4 Week | 2 Week |
| Total | 10 Week | 6 Week | |
| INDUCTION COURSE (SSE/JE/WORKS) (W-1) (Revised) | |||||
| REVISED TRAINING DURATION – 10 MONTHS | |||||
| SN | Type of Training | Place of Training | Duration | Remarks | |
| Existing | Revised | ||||
| 1 | Induction PH-1 | Training institute | 3 month | 3 month | Detailed Training Programme as per Annexure W-1 (a) |
| 2 | Induction PH-1 | Training in field | 2 month | 1 month | Trainee will be given exposure of working in open line for a duratiíon of One month. To make him conversant with following. Open line – (One month) Inspection, record keeping and action required. (1) Buildings, (2) Steel Structure, (3) Passenger amenities, (4) Water suppły, (5) Sanitary Arrangement, (6) Land management, (7) Surveying, (8) Soil Mechanics, (9) Concrete Technology, (10) Estimate. |
| 3 | Induction PH-2 | Training Institute | 3 month | 3 month | Detailed Training Programme as per Annexure W-1 (b) |
| 4 | Induction PH-2 | Training in field | 2 month | 1 month | Trainee will be given exposure of working in Construction Organization for a duration of One month to make him conversant with following:- Construction org – (One month) (i) Bridge work site, (ii) Building Site, (iii) Survey and Land Acquisition, (iv) Work site protection near running lines, (v) Formation and cuttings, (vi) Steel fabrication. |
| 5 | Induction PH-3 | Training in field | 6 week | 6 week | On the Job Training i.e. attachment with SSE/Works Open line/Construction department where he is likely to be Posted. |
| 6 | Posting Exam | Training Institute | 2 Week | 2 Week | Posting Exam Module. Detailed Training Programme as per Annexure W-1 (c) |
| Total | 12 Months | 10 Months | |||
Download Railway Board Circular RBE No.02/2024
Forward reference ⇒ RBE No.